E-Stahl Ramps :    Wheelchair Ramps  -  Loading Ramps  -  Mounting Rails  -  Ramps  -  Pigeon Defence

 
Ramp Series E135

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Inner width mm	Outer width mm	Height of raised edges mm	Wei- ght per pair kg	Prices
	1000	1250	1500						excl. V.A.T.	incl. V.A.T.
E135/25/45L	4500	4500	4500	2500	340	420	32	60	639,40 €	741,70 €
E135/30/45L	4120	4500	4500	3000	340	420	32	72	692,06 €	802,79 €
E135/32/45L	3750	4230	4500	3200	340	420	32	77	713,11 €	827,21 €
E135/35/41L	3300	3665	4120	3500	340	420	32	83	778,05 €	902,54 €
E135/40/33L	2750	3000	3300	4000	340	420	32	93	796,19 €	923,58 €
E135/45/27L	2355	2535	2750	4500	340	420	32	107	938,34 €	1088,47 €
E135/50/23L	2065	2200	2355	5000	340	420	32	117	1016,73 €	1179,41 €
E135/25/45LX	4500	4500	4500	2500	420	500	32	72	680,36 €	789,22 €
E135/30/45LX	4120	4500	4500	3000	420	500	32	88	761,67 €	883,54 €
E135/32/45LX	3750	4230	4500	3200	420	500	32	92	810,23 €	939,86 €
E135/35/41LX	3300	3665	4120	3500	420	500	32	100	842,99 €	977,87 €
E135/40/33LX	2750	3000	3300	4000	420	500	32	103	889,20 €	1031,47 €
E135/45/27LX	2355	2535	2750	4500	420	500	32	118	982,21 €	1139,36 €
E135/50/23LX	2065	2200	2355	5000	420	500	32	129	1069,95 €	1241,14 €

Ramp Series E145

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Inner width mm	Outer width mm	Height of raised edges mm	Wei- ght per pair kg	Prices
	1250	1500	1750						excl. V.A.T.	incl. V.A.T.
E145/25/60L	6000	6000	6000	2500	340	420	42	73	696,74 €	808,22 €
E145/30/60L	6000	6000	6000	3000	340	420	42	89	785,66 €	911,37 €
E145/32/60L	5820	6000	6000	3200	340	420	42	94	828,36 €	960,90 €
E145/35/56L	5045	5675	6000	3500	340	420	42	102	927,81 €	1076,26 €
E145/40/45L	4125	4540	5045	4000	340	420	42	106	977,54 €	1133,95 €
E145/45/37L	3490	3785	4125	4500	340	420	42	122	1013,81 €	1176,02 €
E145/50/32L	3025	3240	3490	5000	340	420	42	133	1095,71 €	1271,02 €

 
Ramp Series E155

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Inner width mm	Outer width mm	Height of raised edges mm	Wei- ght per pair kg	Prices
	1250	1500	1750						excl. V.A.T.	incl. V.A.T.
E155/25/60	6033	6033	6033	2500	420	500	41	83	722,48 €	838,08 €
E155/30/60	6033	6033	6033	3000	420	500	41	102	813,00 €	943,08 €
E155/35/60	5566	6033	6033	3500	420	500	41	117	976,37 €	1132,59 €
E155/40/50	4559	5009	5565	4000	420	500	41	130	1057,68 €	1226,91 €
E155/45/41	3853	4174	4556	4500	420	500	41	149	1263,02 €	1465,10 €
E155/50/35	3339	3578	3853	5000	420	500	41	163	1368,90 €	1587,92 €
E155/25/60L	6033	6033	6033	2500	450	530	41	86	754,65 €	875,39 €
E155/30/60L	6033	6033	6033	3000	450	530	41	105	842,40 €	977,18 €
E155/35/60L	5566	6033	6033	3500	450	530	41	120	1006,20 €	1167,19 €
E155/40/50L	4559	5009	5565	4000	450	530	41	135	1088,10 €	1262,20 €
E155/45/41L	3853	4174	4556	4500	450	530	41	154	1298,70 €	1506,49 €
E155/50/35L	3339	3578	3853	5000	450	530	41	169	1404,00 €	1628,64 €

 
Ramp Series E170

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Inner width mm	Outer width mm	Height of raised edges mm	Wei- ght per pair kg	Prices
	1500	1750	2000						excl. V.A.T.	incl. V.A.T.
E170/25/97	9700	9700	9700	2500	450	530	50	84	804,00 €	932,64 €
E170/30/97	9576	9700	9700	3000	450	530	50	103	892,00 €	1034,72 €
E170/35/82	7182	8209	9576	3500	450	530	50	118	1058,00 €	1227,28 €
E170/40/63	5745	6384	7182	4000	450	530	50	124	1164,00 €	1350,24 €
E170/45/52	4788	5254	5745	4500	450	530	50	142	1341,00 €	1555,56 €
E170/50/44	4104	4420	4788	5000	450	530	50	145	1454,00 €	1686,64 €
E170/55/38	3591	3830	4104	5500	450	530	50	157	1516,00 €	1758,56 €

 
Ramp Series E185

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Inner width mm	Outer width mm	Height of raised edges mm	Wei- ght per pair kg	Prices
	1500	1750	2000						excl. V.A.T.	incl. V.A.T.
E185/25/120	9700	9700	9700	2500	450	530	57	89	834,00 €	1279,84 €
E185/30/97	9700	9700	9700	3000	450	530	57	109	932,00 €	1349,74 €
E185/35/97	8876	9700	9700	3500	450	530	57	124	1097,00 €	1499,91 €
E185/40/78	7100	7889	8876	4000	450	530	57	139	1194,00 €	1577,75 €
E185/45/64	5917	6455	7100	4500	450	530	57	150	1372,00 €	1822,71 €
E185/50/50	5000	5000	5000	5000	450	530	57	154	1483,00 €	2043,27 €
E185/55/47	4438	4733	5000	5500	450	530	57	167	1543,00 €	2261,10 €

 
Ramp Series E200

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Inner width mm	Outer width mm	Height of raised edges mm	Wei- ght per pair kg	Prices
	1500	1750	2000						excl. V.A.T.	incl. V.A.T.
E200/25/122L	12200	12200	12200	2500	500	600	57	112	1103,31 €	1279,84 €
E200/30/122L	12200	12200	12200	3000	500	600	57	128	1163,57 €	1349,74 €
E200/35/121L	10625	12145	12200	3500	500	600	57	152	1293,03 €	1499,91 €
E200/40/94L	8500	9445	10625	4000	500	600	57	167	1360,13 €	1577,75 €
E200/45/77L	7085	7730	8500	4500	500	600	57	191	1571,31 €	1822,71 €
E200/50/65L	6070	6540	7085	5000	500	600	57	207	1761,44 €	2043,27 €
E200/55/56L	5310	5665	6070	5500	500	600	57	231	1949,22 €	2261,10 €

 
Ramp Series E230

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Inner width mm	Outer width mm	Height of raised edges mm	Wei- ght per pair kg	Prices
	1500	1750	2000						excl. V.A.T.	incl. V.A.T.
E230/25/120	12200	12200	12200	2500	500	600	71	112	1142,00 €	1324,72 €
E230/30/120	12200	12200	12200	3000	500	600	71	128	1203,00 €	1395,48 €
E230/35/120	12200	12200	12200	3500	500	600	71	152	1329,00 €	1541,64 €
E230/40/120	12200	12200	12200	4000	500	600	71	167	1392,00 €	1614,72 €
E230/45/109	10008	10918	12200	4500	500	600	71	191	1593,00 €	1847,88 €
E230/50/94	8578	9238	10008	5000	500	600	71	207	1784,00 €	2069,44 €
E230/55/80	7506	8006	8578	5500	500	600	71	231	1978,00 €	2294,48 €

Ramp Series 120S

All series E120 ramps can be manufactured with the following surfaces:

Five-series studded plate for use with vehicles with rubber tyres

Rubber grips for use with vehicles with chain drives (ie. caterpillars or tanks)

 
These surfaces are attached with screws and can be replaced once worn.
We produce all ramps from series E120S with the surface you require at no additional cost. 

 
Code:

G = Hooked header
T = Header with tube
L = Standard header
A = Header with bearing
R = Rubber coating
L = Coating with five-series studded plate
N = No coating

 
Modelling example:

E120S/3/30 GAL
Loading ramp E120S with three 120 modules (total width 360) with hooked header and coating with five-series studded plate.

 
Price quoted on request

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Total width mm	Weight per pair kg
	1500	1750	2000
E120S/2/20	11000	11000	11000	2500	240	55
E120S/2/25	9575	11000	11000	3000	240	65
E120S/2/30	6383	7660	9575	3500	240	76
E120S/2/35	4787	5471	6383	4000	240	86
E120S/2/40	3830	4256	4787	4500	240	97
E120S/2/45	3192	3482	3830	5000	240	108
E120S/2/50	2736	2946	3192	5500	240	118
E120S/2/55	2394	2553	2736	5500	240	129

 
Price quoted on request

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Total width mm	Weight per pair kg
	1500	1750	2000
E120S/3/20	13200	13200	13200	2500	360	78
E120S/3/25	13200	13200	13200	3000	360	94
E120S/3/30	9574	11489	13200	3500	360	110
E120S/3/35	7181	8207	9574	4000	360	126
E120S/3/40	5744	6383	7181	4500	360	141
E120S/3/45	4787	5222	5744	5000	360	157
E120S/3/50	4103	4419	4787	5500	360	173
E120S/3/55	3590	3829	4103	5500	360	189

 
Price quoted on request

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Total width mm	Weight per pair kg
	1500	1750	2000
E120S/4/20	17500	17500	17500	2500	480	103
E120S/4/25	17500	17500	17500	3000	480	125
E120S/4/30	12766	15319	17500	3500	480	146
E120S/4/35	9574	10942	12766	4000	480	167
E120S/4/40	7659	8511	9574	4500	480	188
E120S/4/45	6383	6963	7659	5000	480	209
E120S/4/50	5471	5892	6383	5500	480	230
E120S/4/55	4787	5106	5471	5500	480	257

 
Price quoted on request

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Total width mm	Weight per pair kg
	1500	1750	2000
E120S/5/20	21700	21700	21700	2500	600	129
E120S/5/25	21700	21700	21700	3000	600	155
E120S/5/30	15958	19149	21700	3500	600	182
E120S/5/35	11968	13678	15958	4000	600	208
E120S/5/40	9574	10638	11968	4500	600	235
E120S/5/45	7979	8704	9574	5000	600	261
E120S/5/50	6839	7365	7979	5500	600	288
E120S/5/55	5984	6383	6839	5500	600	314

 
Price quoted on request

Item No.	Maximum load per pair (kg) with distance between axels (mm)			Length mm	Total width mm	Weight per pair kg
	1500	1750	2000
E120S/6/20	26300	26300	26300	2500	720	154
E120S/6/25	26300	26300	26300	3000	720	186
E120S/6/30	19149	22979	26300	3500	720	218
E120S/6/35	14362	16414	19149	4000	720	250
E120S/6/40	11489	12766	14362	4500	720	281
E120S/6/45	9574	10445	11489	5000	720	313
E120S/6/50	8207	8838	9574	5500	720	345
E120S/6/55	7181	7659	8207	5500	720	377

Important Guidelines for Using the Ramps

Load-carrying capacity

1. Please keep to the load-carrying capacity as specified on the product label.

2. The ramps you have purchased were tested with a width of 750 - 2000 mm between the axels.

3. The load-carrying capacity as specified on the product label relates to the specified distance between the axels.

4. Should you wish to use a vehicle with axels further apart than the distance stated on the product label, please contact your specialist dealer who will inform you of the load-carrying capacity of your ramp in relation to the distance between axels of the moving vehicle.

 
Instructions

1. Place your ramp onto the loading platform and ensure that it is not tilting.

2. All wheels of vehicles to be loaded must be jammed with wedges or similar such devices. Specially equipped ramps are available for steel tracked vehicles.

3. Specially equipped ramps are essential for loading steel tracked vehicles.

4. At the loading level, ramps must be secured using the recommended anchorage method. When loading, your vehicle should not exceed a speed of 0.3m/second. Sudden breaking or acceleration should be avoided.

5. Before use, the ramps must be checked to ensure that they are in optimum condition. There should not be any signs of deformation or damage.

6. Ramps must under no circumstances be supported. It is also forbidden to mount steel tracked vehicles onto ramps that are not equipped for this purpose, or for wheels or tracks to be driven across the ramps edges.